When you have a properly installed and designed home insulation system, you could expect it to offer long-term and immediate benefits. This will best protect your equipment, your personnel, your budget, and your system. There are so many benefits that can be obtained from it other than cutting down cooling in AC bills. For one, it can prevent moisture condensation and reduce the size and capacity of a new type of mechanical equipment. Secondly, it can best enhance the performance of the process and reduce the emissions of the pollutants. Thirdly, the acoustical performance is also improved as the noise levels are reduced. There will be a good return on investment while the appearance is improved.

Home insulation also plays an essential role in maintaining a comfortable environment in your home. Problems like mildew and mold and hot attic temperatures during the summer can be offset by home ventilation. Even though it is something that is not fun to spend money on, you will realize that home insulation should be your priority. It may not be a fun purchase like a new counter top but it is worth all the way. It will save you money and will make you even more comfortable in your house.

How does it work? The thermodynamics work as the heat flows from a hot place to a cool place. When there is no enough insulation, it means to say that the heat seeps into your house. The air conditioner will have to work even harder. An insulation contractor once said that the heat screams in through the ceiling.

To get a clearer picture of home insulation, it reduces the exchange of heat by using a surface like the attic, duct, roof, and wall. In such a properly-insulated home, less warm air will escape from the house during the winter. And there will only be less air that will escape during the summertime. And thus, the amount of energy needed for cooling and heating will be greatly reduced. The improvement of the insulation in some older structures will lower the annual cooling and heating bill by up to twenty percent.

Some Tips to Cut Down Cooling in A/C Bills.

Insulate Floors, Attics, and Walls

The envelope or the outer shell of your home serves as the barrier preventing the temperature of the outside and the inside air from equalizing. When the floors, walls, and roof are better insulated, there only will be less energy used by the cooling systems. That is also when you will cool the air inside your home. As the heat rises, it is best to insulate your roof to keep the cool air inside during hot climates.

Also Read: A Little Secret about The Ideal Bedroom Colour

Seal Air Leaks

Walls having good insulation can let cool air escape through gaps and cracks around doors and windows. The drafty homes will demand more power to cool than tight homes. Save energy by way of weather-stripping and caulking to stop the air from leaking. In older homes, it can be impossible sealing the house so tight. With the construction methods that are using, there will be adequate fresh air that can best maintain proper ventilation. This is right after the biggest leaks have been completely sealed.

Insulate Reflectively

Insulation can best reduce heat transfer as it blocks it physically. This is also best known as the radiant barrier. This is also installed right through the attic floor as it reflects the heat that is radiated into the attic by the hot roof. It then prevents it from allowing the living space right below. Reflective insulation has its value when it comes to lowering the heating bills. The main purpose is to maintain the house cool during the hot climates.

Consider the R-value for insulation in the area

The thermal resistance or the insulating power is called as the R-value. If there is a higher R-value, the insulation will, even more, become effective; the needed R-value will vary on the cooling system and on the climate that you have. Better to take a closer look at a guide to help you know the insulation needed for your home.

When you will insulate the walls, the internal wall insulation of R-13 is needed. For the attics, you will need anywhere between R-4 or R-30 insulation.

For the basements, it will require a rating of about R-11 and R-15. When you will insulate the floor, make use of R-30 or R-12 depending on the climate zone.

Determine the stud distance and the area of the area where you will install the insulation.

Measure the height and the length of the wall. Multiply them all together to find the area of the wall. Measure the distance between two of the vertical studs right through the wall. That way, you will know how wide the insulation should be. The stud distance will fall between sixteen to twenty-four inches. When you will insulate an attic, measure the width and the length of the floor of an attic. Do not measure the distance of the wall studs. Instead, find the length between two of the floor joists.

Choose the Foam Boards or Batts for your Walls

Insulation batts are known as natural fibers or fiber glasses that come in pre-cut strips or rolls. They also work best when it comes to insulating the floors, ceilings, and walls. The foam boards insulate are large-size panels that work for floors, ceilings, and foundation walls.

Choose the insulation having an R-value that is needs by your home. Check the packaging as well to know the area that a single piece can cover. That way, you will get enough for the area that you will be insulating.

Buy insulation from the home improvement store or also online. Obtain insulation having vapor barriers on one side. This will help prevent moisture from passing through the insulation.

Also Read: DIY Tips To Keep The Energy Bill Low In The Cold Months

Wear Gloves, Long Sleeves, and Face Protection

Insulation is made of fiber glass material. This irritates when you come into contact with it; even before you start, put on a long-sleeved shirt and pants to cover much of your skin. Wear goggles and work gloves to cover your eyes completely. Wear face mask so that you will not inhale fiber glass particles.

Cut the Insulation Using a Utility Knife that Fits the Height of the Walls.

Unroll the home insulation so that the moisture vapor faces up. Measure the length needed using a tape measure. And then, lay the straightedge right above the insulation. Press it down so that the foam is compress. Push the blade of the utility knife into the insulation. Pull it toward you so that it slices through. Also, use an insulation knife that will saw through the insulation. Buy insulation knives from the local hardware store. Cut the foam boards using a utility knife.

Push the Insulation Right Between the Studs.

Push the insulation right between the studs so that it fits snugly. The insulation must be guide into the space between the studs. That way, the vapor barrier will face the interior side of the home. Push the insulation into the space and between the studs. Do not compress the foam or it will never be as effective as it could be. Flush the front part of the insulation with the use of the front of the studs. That is also when you are do putting it in.

Understand that compressed insulation will never work to its complete thermal resistance rating. Now if there be a fixture or electric box in the wall, cut the insulation. That way, it will fight tightly around it.

Staple the Home Insulation to the Studs’ Sides to keep it in Place

Grab the moisture barrier or the edge of the insulation. Hold it firmly against the side of the wall stud. And drive the staples into the wall stud every six-inches or fifteen centimeters along the stud. Do the process again on the other side of the installation. That way, it will be securely set in place. Some of the home insulation falls under the label of compression-fit. It does no longer need stapling. Also, staple the insulation right through the front of the wall stud. However, it could affect the way that the drywall sits on it.

Now, you have learned just exactly how home insulation can cut down cooling in A/C bills. And you already have an idea on how to do things considering insulation!